LP 250 NITROX ROTARY

Coltri LP250 Nitrox ROTARY for Scuba Diving: It consists of an industrial screw compressor that delivers air at a pressure of 10 bar to the Parker® membrane. The percentage of oxygen obtained at the outlet can be adjusted from 32% to 36% thanks to a valve accessible on the front side of the compressor. If connected to a compressor with pumping unit 315 (MCH 16), Nitrox at 32% can be obtained up to a pressure of 232 bar. The oxygen analyzer allows you to check the correct percentage, adjusting it through the appropriate valve.

QUICK-LINK S.S.

Quick-Link stainless-steel, dimensions 36 x 17 mm, thickness 3,5 mm, opening max 5 mm.

LP 300 NITROX ROTARY

The Coltri LP300 Nitrox ROTARY model consists of an industrial screw compressor that delivers air at a pressure of 12 bar to a membrane that separates nitrogen and oxygen up to a maximum percentage of 40% O2. The enriched air can be compressed at a pressure of 232 bar in combination with a high pressure compressor. The percentage of oxygen obtained at the outlet can be regulated from 22.4% to 40% using a valve directly accessible on top of the compressor. The oxygen analyser allows checking of the correct percentage adjusted by means of the appropriate valve.

LP 600 NITROX ROTARY

At the top of the Nitrox line, the Coltri LP600 ROTARY system consists of an industrial screw compressor that delivers air at a pressure of 8 bar to a membrane that separates nitrogen and oxygen at atmospheric pressure until Nitrox 40% O2 is obtained and can be compressed at a pressure of 232 bar in combination with a high pressure compressor. The percentage of oxygen obtained at the outlet can be regulated from 22.4% to 40% using a valve directly accessible on top of the compressor. Exclusive to the the Heavy Duty line compressors.

FILLING PANEL FOR COMPRESSOR

It has two gauges (one for each pressure) for controlling the load pressure. With its internal pressure regulator, you have the ability to offer dual pressure load (2 outputs and 2 outputs 300 bar to 225 bar).

FILLING PANEL FOR COMPRESSOR WITH CAMS

Panel loading with 4 exits for connection to any compressor Coltri range. It has manometer to control the load pressure. Combined with a bank of air, it can be an ideal place for a bottle loading station configuration.

BUNGEE MOUNT FOR VYPER/GEKKO/VYTEC

Bungee cord mounted gauges are easier to don than buckled standard straps.Low profile.Depth compensating.Securely retains your instrument. Remains flexible. - Snap in fit.For Vyper/Gekko/Vytec Suunto Computers

BUNGEE MOUNT FOR UWATEC COMPASS

Bungee cord mounted gauges are easier to don than buckled standard straps.Low profile.Depth compensating.Securely retains your instrument. Remains flexible. - Snap in fit.For Uwatec Compass.

MOLECULAR SIEVE

Molecular absorbent canister (alumina), to fill the cartridge air purifier filter used in MCH13-16-36 compressor.

BUNGEE MOUNT FOR SK7

Bungee cord mounted gauges are easier to don than buckled standard straps.Low profile.Depth compensating.Securely retains your instrument. Remains flexible. Snap in fit. For Suunto SK7 Compass.

ACTIVATED CARBON

Activated carbon canister parts to fill the cartridge air purifier filter used in MCH13-16-36 compressors.

BUNGEE MOUNT FOR ALADIN PRIME & DIGITAL GAUGE

Bungee cord mounted gauges are easier to don than buckled standard straps.Low profile.Depth compensating.Securely retains your instrument. Remains flexible. Snap in fit. For Aladin Prime Computer.

WRIST DEPTH GAUGE 70 M

Wrist analog depth gauge up to 70 m, with maximum depth marker. Very useful in apnea or spearfishing lowered to control depth.

2nd STAGE 90° REVOLVING CONNECTOR

Fixed elbow to place between the second stage and the hose, which allows routing to 90 degrees. Made of chrome plated brass. Thread 9/16 "Male to 9/16" female.